Posts Tagged ‘gnu/linux’

Remoting K8GU…kinda

June 19th, 2014

I recently had to spend some time away from home without a radio wished I could remote control my station…

Having been party to the discussion surrounding remoting a local contest station (K4VV), I had seen enough traffic about different VOIP options to start with Mumble for the audio stream.  I set up a Mumble server on my Linux server at the house, and then setup the Mumble client on my hamshack computer.  I ran a 1/8-inch TRS cable from the rear-apron line-out port of the K3 into the line input of one of my sound cards on the computer.  I put a free Mumble client on my iPhone and viola!  It worked out of the box.

I have been using Pignology’s HamLog on my phone for quick logging of one-off QSOs and goofing off with its vast array of tools.  HamLog also has the ability to remote control a rig using Pignology’s hardware.  Since, I’m really not in a good position to drop $300 on a box I’ll use a couple of times per year, I reasoned that there might be an alternative.  Enter the socat utility:

root@tula:~# socat /dev/ttyUSB1,raw,echo=0 tcp-listen:7373,fork

Freakin magic.  I used HamLog to connect to a “Remote PigTail” and it mostly works.  The frequency display does not seem to work and HamLog loses the connection if the phone falls asleep.  But, it is functional.  Another interesting wrinkle is that when my shack PC screensaver comes on, it mutes the audio stream piped into Mumble.  But, those are all minor irritations at this point considering the trivial amount of effort that went into getting a remote control going…

Getting off Windows XP

May 18th, 2014

With the impending end-of-life of Windows XP a few weeks ago, I found myself with a bit of a predicament:  My shack PC is a dual-core 64-bit system (3.0-GHz Pentium-D) so it’s not really a slouch performer.  But, it had only 1 GB of RAM, which was fine for XP.  I could upgrade my RAM and upgrade Windows, or I could upgrade the RAM and dispense with Windows altogether.

I opted to drop Windows.

My almost-3-year-old son helped me install 4 GB of RAM last weekend.  (Actually, he spent more time asking about the capacitors on the motherboard. Kids these days.)

I’m a long-time GNU/Linux user (just over 15 years, actually) and fan.  However, as I wrote once in the past, I’m also fan of getting things done.  So, I kept using Windows 95 / MS-DOS for many years on my hamshack computer, with a brief several-year foray into using Windows XP when I moved to TR4W logging software.  Linux finally became ready for prime time in my hamshack when Kevin, W9CF, ported TR-Log over a couple of years ago.  After ensuring it wasn’t a fad, I was ready to jump.  Over the past week or so, I’ve been tailoring the setup of everything to bring back the functionality I had previously.

So, what broke?

  • I have an nVidia graphics card for my second monitor. Failure. Not sure how much I care. Maybe I’ll look for an old ATI card or something else with drivers?  Anybody have a plain PCI video card with VGA or HDMI kicking around?
  • Windows-specific software that I’ll probably just quit using:  AVR Studio and SH5. Didn’t really use these much anyway.
  • Now, for the truly bizarre:  My Elecraft K2/100 throws an ERR 080 on power-up if I disrupt communication between it and TR-Linux (does not matter if the K2 goes off first or TRLinux quits first).  I have to disconnect the RS-232 cable at the back of the K2 for a while and then it comes back OK.
  • ARRL’s Trusted QSL software version 2.0.1 didn’t compile immediately without dependency problems. Further study indicated.

And, what works?

  • TRLinux talks to both the K3/100 and the K2/100, as well as the YCCC SO2R+ controller.
  • Made some QSOs and uploaded the signed log to LoTW.
  • Pretty much everything else…